Digital Loop At the showcase at the IAA the vehicle drives around an obstacle independently

“Digital Loop” showcase at IAA Mobility in Munich

The digital solution accelerates the homologation of vehicle software updates using virtual simulation

September 01 2023

Project team presents showcase live in Munich

A collaboration between Kontrol, dSPACE, FEV.io, TÜV SÜD, Microsoft Germany, T-Systems and Berylls is developing a new digital solution for the approval of updates for software-defined vehicles. The new concept for software-update approval via the mobile network, Digital Loop, will be showcased for the first time at IAA Mobility in Munich from September 4 to 8.

Fast and reliable test procedure for approved vehicles required

Close-up of car window with partner logos

Before a new vehicle type with automated driving functions can be placed on the EU market, it must be tested under a variety of road and environmental conditions and validated. As software has become an integral part of vehicles, homologation – as this testing and validation process is known in the automotive industry – is now also mandatory for certain software updates. Today, it is already possible to carry out over-the-air (OTA) integration of software updates subject to homologation and even new functions into fully and partially automated vehicles. However, the processes involved are very time-consuming due to the strictness of the regulatory requirements concerned. Manufacturers, Technical Services and approval authorities therefore need a fast and reliable test procedure for approved vehicles that are already on the road. 

Conformity on the basis of virtual homologation using the Digital Loop

To overcome these challenges, seven companies partnered up to form a project team with the aim of developing a software-based virtual homologation process for extensive OTA vehicle updates via the mobile communications. Their “Digital Loop” offers significant advantages for vehicle manufacturers and regulatory authorities, saving both time and cost in type approvals as well as maintenance of product conformity throughout a vehicle’s life cycle. Challenges here include reducing risks and the complexity of regulatory processes, getting the increasing cost of software development and validation under control, and speeding up process time.

Our mission is to revolutionize the validation and homologation of software updates in software-defined vehicles and shorten the time to market, while ensuring the highest safety standards and compliance with legal requirements in operation.

Alexander Kraus, TÜV SÜD CTO Division Mobility

Real-life scenarios in a virtual simulation environment

To overcome these difficulties, real-life scenarios are simulated using cutting-edge techniques ensuring that the digital environment offers the accuracy and reliability required for testing, validation and homologation. The virtual simulation environment is a digital image of the real world, based on highly detailed, realistic 3D models of streets, vehicles, pedestrians, weather conditions and other factors. The vehicle systems are confronted with these simulations and their reactions and decisions are analyzed. Digital Loop is designed to significantly accelerate the homologation process for OTA software updates and to substantially reduce the number of analogous test processes.

Success with data spaces like Catena-X: better data instead of Big Data

This is how you can use data spaces and protect your data sovereignty at the same time, as well as develop new data products and make groundbreaking super apps.

Kontrol, dSPACE, FEV.io, TÜV SÜD, Microsoft, T-Systems and Berylls united in a single mission

With “Digital Loop”, the project team is striving for faster, continuous and virtual homologation. Modern cars are computers on wheels, with software controlling their key functions. Given this, cross-industry collaboration between car manufacturers, authorities and Technical Services as well as IT and software companies is taking on an increasingly important status. Digital Loop is a broadly diversified project team that combines all relevant areas of expertise: TÜV SÜD operates as a Technical Service on behalf of authorities and can thus draw on comprehensive expertise in safety assessments, certification and homologation. Kontrol supplies knowledge in the field of regulatory compliance in formats including a software-driven compliance platform. FEV.io, an integrated provider of software development services for intelligent and safe mobility, provides worldwide support along the entire value chain of vehicle and system development. dSPACE contributes its expertise in the simulation and validation of autonomous driving functions. Microsoft Germany offers the cloud infrastructure of Microsoft Azure as well as various AI, VR and cybersecurity technologies and its extensive competences. T-Systems integrates the building blocks provided by the project partners into a holistic solution and transmits the OTA software updates to the vehicles over the mobile network. Berylls Group delivers strategic advisory services and holistic (process) implementation skills.

Digital Loop: Showcase and panel discussion at IAA Mobility 2023

The team is presenting its concept to the public for the first time at IAA Mobility in Munich. A showcase at the trade fair centre maps the entire virtual homologation process, from the pre-update functionality (test run 1) and a step-by-step presentation of the virtual homologation to the post-update enhanced functionality (test run 2). An operational design domain (ODD) expansion for an SAE level 3 vehicle provided by FEV.io with automated lane-keeping system – an update that is critical for homologation – demonstrates the interaction between the individual partners in practice.

A panel discussion entitled “The Future of Vehicle Homologation: Embracing Innovation and Technological Advancements“ will be held at 4 pm on 6 September. Top executives from the vehicle industry will discuss the challenges, technological solutions, and future scenarios of homologation. Richard Damm (President of Kraftfahrt-Bundesamt (KBA)), Kai Grünitz (Board Member Technical Development at Volkswagen Brand), Patrick Fruth (CEO TÜV SÜD, Division Mobility), Dr. Rupert Stützle (General Manager Lead EMEA for Manufacturing and Mobility at Microsoft) and Dr. Christian Hort (Senior Vice President Automotive, T-Systems International) have confirmed their participation in the panel discussion to be held on the Blue Stage in Hall A3.

You may also find this interesting

We look forward to your project!

We would be happy to provide you with the right experts and to answer your questions about planning, implementation, and maintenance for your digitalization plans. Get in touch!

Do you visit t-systems.com outside of Germany? Visit the local website for more information and offers for your country.